HP Compaq dc7700 driver

HP Compaq dc7700p Business Desktop 786E1 BIOS 3.05 Rev.A

This package contains utilities that can be used to restore or update the system BIOS on the supported desktop models with a 786E1 BIOS.
The Active Management Technology (AMT) V2.2 Management Engine (ME) firmware image is only intended for Intel vPro configurations. This package, including the V3.05 system BIOS, is not intended for non-AMT systems.
IMPORTANT: The system should NOT be updated with this new ME firmware if it is a non-vPro configuration, or if it is using ASF as the management selection in a vPro configuration. Once the ME firmware is updated to this new image, it CANNOT be re-flashed to an older ME firmware version (that is, it CANNOT be restored to a V2.0, or earlier AMT version), and functionality may be adversely impacted in some ASF configurations.
Several methods for changing the BIOS version may be chosen. Included in this package are the following methods:
- Use the DOS utility with a pre-boot execution environment (PXE) management application to locally update or restore the system BIOS.
- Use HPQFlash to upgrade the BIOS directly in a Microsoft Windows or Microsoft Windows Vista environment.
- Create a CD image to upgrade/restore system BIOS.
ENHANCEMENTS:
- Adds support for full-speed hubs with endpoint numbers greater than 1.
FIXES:
- Fixes an issue where the system stops responding (hangs) while Microsoft Windows is loading when keys are pressed and multiple keyboards are present. The BIOS now checks USB UHCI controllers for ownership changes or halt state before attempting runtime device enumeration.
PREREQUISITES:
None
INSTALLATION INSTRUCTIONS:
1. Download the file by clicking the 'Download' or 'Obtain Software' button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions.
NOTE: Only the System BIOS component of this SoftPaq is SSM Compliant. The Intel Management Engine (ME) firmware is not SSM compliant, and therefore, requires a different method for remote deployment.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.